TrackTech Complete Top End Cylinder Head Gasket / Studs Service Kit
03-10 6.0L Ford Powerstroke w/20mm or 18mm Dowel
TrackTech Head Stud Kit SKU: TTP0310HS002
(Please See The Installation Instructions In The Technical Documents Section Of This Listing.)
- (20) Cylinder Head Studs
- (20) Cylinder Head Stud Nuts
- (20) Cylinder Head Stud Washers
The highest tensile strength in class TrackTech Head Studs are manufactured with the highest tensile strength in the industry at 240,000 PSI. They are tested in several ways including in the lab using a state-of-the-art UTM machine validating 240k PSI tensile strength. Plus, on the track where racers put TrackTech fasteners through the most demanding conditions making these head studs the race-proven choice for your truck.
- 240,000 PSI Tensile Strength
- UTM Machine Tested and Validated
- Lab, Bench, Street and Strip Tested
Head Gasket Set HS54579
- Includes all gaskets and seals including Head Gaskets (1 set, 18mm OR 20mm)
- This kit includes all the parts for both either an 18mm OR 20mm Dowel equipped engine
Since this is a major repair we suggest using the best available hardware to get the job done right the first time. Here are some supplemental items our customers have chosen when opting to complete this repair: Thermostat, PCV System Replacement or Upgrade, Fuel Filter, Oil Change, Coolant Change, Engine Air Filter
TrackTech Set Of 16 Rocker Arm Clips For 03-07 6.0L Ford Powerstroke SKU: TTP0310RA702
For A Bottom End Repair You Will Also Need The Following
If the repair requires the removal of pistons or the crankshaft you will need the following in addition to the parts outlined above. Timing Cover Gaskets, Front Crank Seal, Rear Crank Seal, Pistons or Piston Rings, Rod Bearings, Main Crank Bearings etc.
TrackTech Main Stud Kit SKU: TTP0310MS102
18 mm Dowels were used from 2003-Jan 11th 2006
20 mm Dowels were used from Jan 12th 2006 – On
Also Available at the Following Distributors
Prosource Diesel and Norcal Diesel Performance
There are no reviews yet.