Customer 
California Residents: Prop 65 WarningDescription
TrackTech Complete Top End Cylinder Head Gasket / Studs Service Kit
Fitment
94-97 7.3L Ford Powerstroke
Engine Serial Number: 661,973 and before
Engine Build Date: 12/07/98 and before
(Please See The Installation Instructions In The Technical Documents Section Of This Listing.)
- (28) Cylinder Head Studs (Longer)
- (8) Cylinder Head Studs (Shorter)
- (36) Cylinder Head Stud Nuts
- (36) Cylinder Head Stud Washers
The highest tensile strength in class TrackTech Head Studs are manufactured with the highest tensile strength in the industry at 240,000 PSI. They are tested several ways including in the lab using a state-of-the-art UTM machine validating 240k PSI tensile strength. Plus, on the track where racers put TrackTech fasteners through the most demanding conditions making these head studs the race-proven choice for your truck.
- 240,000 PSI
- UTM Machine Tested and Validated
- Lab, Bench, Street and Strip Tested
MAHLE HEAD GASKET SET
- Mahle Head Gasket x2
- Head Studs x36
- Head Stud Washers x36
- Head Stud Nuts x36
- Valve Cover Gasket x2
- Valve Stem Seals x16
- Injector O-Ring Set x8
- CCV O-Rings Small x2
- CCV O-Rings Large x2
- IPR Service Kit
- Updated Fuel Rail Banjo Bolts x4
- Complete Fuel Filter Housing Reseal Kit
- Fuel Pump Line to Head Grommets
- Fuel Pump Line to Head Aluminum Seal
- Fuel Filter Housing Fuel Pump Hose Kit x5
- Updated High Pressure Oil Rail Inner Plugs with O-Rings x4
- Updated High Pressure Oil Rail Outer Plugs with O-Rings
- High Pressure Oil Rail External Plug O-Rings x8
- High Pressure Oil Pump Reservoir Upper Gasket x1
- High Pressure Oil Pump Reservoir Lower Gasket x1
- High Pressure Oil Pump to Reservoir Mounting Gasket x1
- High Pressure Oil Pump Discharge Fitting x1
- High Pressure Oil Pump Discharge Fitting O-Rings x2
- High Pressure Oil Pump Drain Plug O-Ring x1
- Turbocharger Flange Gasket x1
- Turbocharger Pedestal O-Rings x4
- Turbocharger Compressor Outlet O-Ring x1
- Turbocharger Up-Pipe Donut x2
- Exhaust Manifold Gasket x2
- Exhaust Manifold Bolts x16
- Exhaust Plenum Bolts x4
- Long Up-Pipe Bolts with Nuts x4
- Short Up-Pipe Bolts with Nuts x4
Supplemental Parts
Since this is a major repair we suggest using the best available hardware to get the job done right the first time. Here are some supplemental items our customers have chosen when opting to complete this repair: Thermostat, PCV System Maintenance or Upgrade, Fuel Filter, Oil Change, Coolant Change, Engine Air Filter, Glow Plugs etc.
TrackTech 10.9 Exhaust Manifold Bolt Kit For 94-03 7.3L Powerstroke: TTP9403EB401
For A Bottom End Repair, You Will Also Need The Following
If the repair requires the removal of pistons or the crankshaft you will need the following in addition to the parts outlined above. Timing Cover Gaskets, Front Crank Seal, Rear Crank Seal, Pistons or Piston Rings, Rod Bearings, Main Crank Bearings, etc.
TrackTech Main Studs Kit For 94-03 7.3L Powerstroke: TTP9403MS101
Upgrades
Many of our customers opt to upgrade some of the parts they will be removing in order to perform this repair. We invite you to take a look at the available options for this engine: