Description
Built to hold under pressure, TrackTech top-end service kits combine head studs rated at 220,000 PSI tensile strength with head gaskets and sealing components for cylinder head service. Each kit pairs the application-specific gasket set with matching stud nuts and washers.
Features and Benefits
- Head studs rated at 220,000 PSI tensile strength
- Laboratory tensile testing using a universal testing machine
- TrackTech head gaskets, sealing components and matching head stud hardware in one service kit
Kit Contents
Cylinder Head Gaskets
- 2 TrackTech cylinder head gaskets
- Cylinder head alignment dowels
Head Studs and Hardware
- 28 long main cylinder head studs
- 8 short main cylinder head studs
- 9 smaller auxiliary studs
- 45 matching nuts – 36 main and 9 auxiliary
- 45 matching washers – 36 main and 9 auxiliary
Only need head studs? Shop the TrackTech 6.7L Powerstroke head stud kit.
Valve Cover and Valvetrain Seals
- 2 valve cover gaskets
- 32 valve stem seals
Fuel Injector Lines, Seals and Hardware
- 8 fuel injector supply tubes
- Fuel injector-to-valve cover seals
- Fuel injector body O-rings
- Fuel injector return fitting O-rings
- Fuel injector copper sealing washers
- Fuel injector hold-down bolts
Fuel System Seals
- Low-pressure fuel line-to-high-pressure pump O-rings
Intake and Charge Air Sealing
- Intake manifold gaskets
- Throttle body gasket
- Charge air cooler tube seals
EGR System Sealing
- EGR bypass valve gasket
- EGR valve mounting gasket
- EGR cooler core gasket
- EGR cooler end tank gasket
- EGR cooler housing O-rings
- EGR cooler-to-valve cover seals
- EGR inlet pipe gaskets
- EGR outlet pipe gaskets
Turbocharger and Exhaust Parts
- Exhaust manifold gaskets
- Turbocharger up-pipe gaskets
- Turbocharger mounting gasket
- Turbocharger pedestal gasket
- Turbocharger oil feed seals
- Turbocharger V-band clamps
Cooling System Seals
- Thermostat housing seal
- Heater hose inlet pipe O-ring
- Radiator hose seals
- Coolant crossover gaskets
Oil System and Crankcase Seals
- Crankcase breather gaskets
- Oil filler tube O-ring
- Rocker arm manifold O-rings
Vacuum System Seals
- Vacuum pump mounting gasket
Vehicle Fitment
- 2011-2019 Ford F-250 F-350 F-450 F-550 6.7L Powerstroke
Installation Notes
Select the 2011-2014 or 2015-2019 kit to match the truck. Follow the installation instructions for the selected gasket set and fasteners. Follow the TrackTech instructions for this specific kit, including the specified lubricant, tightening sequence and torque procedure.
1-Year Limited Warranty
This TrackTech product is backed by a one-year limited warranty against defects in materials and workmanship from the original purchase date. Coverage applies to the original purchaser with dated proof of purchase. Contact TrackTech for return authorization before shipping the part for inspection. If inspection confirms a covered defect, TrackTech will replace the part. Coverage excludes normal wear and damage caused by improper installation, misuse, contamination, inadequate maintenance, unauthorized modifications or repairs, or use outside the part’s listed application. Customers are responsible for shipping costs to and from TrackTech, whether the warranty claim is approved or denied. Labor, diagnostics, removal, reinstallation, towing, downtime, and other related expenses are not covered.


