TrackTech Main Bearing Studs for 1989-Early 1997 5.9L Cummins 12V

TrackTech Main Bearing Studs for 1989-Early 1997 5.9L Cummins 12V

For engines with 14mm main cap fasteners.
Does not fit late 1997 and 1998 engines with 12mm main cap fasteners.

SKU: TT075   ITEM NO: 129504

$179.95

in stock

alert-icon California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit: www.p65warnings.ca.gov

Description

Build a solid foundation for your engine with a TrackTech main bearing stud kit featuring 220,000 PSI tensile strength. Designed to secure the main bearing caps to the engine block, this kit provides application-matched hardware for bottom-end assembly.

Features and Benefits

  • 220,000 PSI tensile strength
  • Application-matched hardware for the main bearing cap assembly
  • Stud-and-nut fastening for bottom-end engine service
  • Backed by a one-year limited warranty

Kit Contents

  • 14 M14 main bearing studs
  • 14 main stud nuts
  • 14 main stud washers

Vehicle Fitment

  • 1989–1993 Dodge D250 D350 W250 W350 5.9L Cummins 12V with M14 main cap fasteners
  • 1994–early 1997 Dodge Ram 2500 3500 5.9L Cummins 12V with M14 main cap fasteners

Installation Notes

Follow the TrackTech instructions supplied for this exact kit, including the specified lubricant, torque values and tightening sequence. Check main bearing bore size and alignment with the final fasteners installed and tightened as instructed; machining may be required based on the measurements. Verify hardware clearance during assembly.

For M14 main cap fasteners only. This kit does not fit late 1997 or 1998 engines equipped with M12 main cap fasteners.

1-Year Limited Warranty

This TrackTech product is backed by a one-year limited warranty against defects in materials and workmanship from the original purchase date. Coverage applies to the original purchaser with dated proof of purchase. Contact TrackTech for return authorization before shipping the part for inspection. If inspection confirms a covered defect, TrackTech will replace the part. Coverage excludes normal wear and damage caused by improper installation, misuse, contamination, inadequate maintenance, unauthorized modifications or repairs, or use outside the part’s listed application. Customers are responsible for shipping costs to and from TrackTech, whether the warranty claim is approved or denied. Labor, diagnostics, removal, reinstallation, towing, downtime, and other related expenses are not covered.

Additional information

Weight 3.00 lbs
Dimensions 3 × 8 × 11 in
Brand

Manufacturer Part Number

Part Type

Main Stud

Year

, , , , , , , ,

Make

Model

, , , , ,

Engine

5.9L 12V Cummins

Engine Family

Cummins

Interchange Part Number

,

Tensile Strength

220,000 PSI

Main Stud Quantity

14

Fitment Notes

For engines with 14mm main cap fasteners. Does not fit late 1997 and 1998 engines with 12mm main cap fasteners.

Warranty

Tags 12 valve cummins main studs, 12v cummins main studs, 5.9 cummins main studs, 6bt main studs, cummins main studs, diesel parts, main bearing stud kit, main studs
See why Customers Love Tracktechfasteners
Write a review
0.00 00 Reviews
V
ValerieVazquez
5 Verified Buyer
11/09/23
Neck & Shoulder pain gone
I absolutely love this pillow! I was experiencing horrible neck & shoulder pain with other pillows. So I was desperate to find a side sleeper pillow that was give me relief. After just a few nights in this pillow I had much less pain. A week later and no pain!
Was This Review Helpful? 14 0