Description
Build a solid foundation for your engine with a TrackTech main bearing stud kit featuring 220,000 PSI tensile strength. Designed to secure the main bearing caps to the engine block, this kit provides application-matched hardware for bottom-end assembly.
Features and Benefits
- 220,000 PSI tensile strength
- Application-matched hardware for the main bearing cap assembly
- Stud-and-nut fastening for bottom-end engine service
- Backed by a one-year limited warranty
Kit Contents
- 10 short main bearing studs
- 9 long main bearing studs
- 1 extended main bearing stud for the oil-pickup mount
- 20 main stud nuts
- 20 main stud washers
- 1 oil-pickup mounting nut
- 1 oil-pickup spacer washer
Vehicle Fitment
- 1994–1997 Ford F-250 F-350 7.3L Powerstroke
- 1999–2003 Ford F-250 F-350 F-450 F-550 Super Duty 7.3L Powerstroke
- 1995–2003 Ford E-350 Econoline 7.3L Powerstroke
- 1996–1998 Ford Econoline Super Duty 7.3L Powerstroke
- 1999–2003 Ford E-450 Econoline 7.3L Powerstroke
- 2002–2003 Ford E-550 Econoline 7.3L Powerstroke
- 2000–2003 Ford Excursion 7.3L Powerstroke
Installation Notes
Follow the TrackTech instructions supplied for this exact kit, including the specified lubricant, torque values and tightening sequence. Check main bearing bore size and alignment with the final fasteners installed and tightened as instructed; machining may be required based on the measurements. Verify hardware clearance during assembly.
Use the extended stud and the smaller mounting nut and spacer washer at the oil-pickup mounting position, following the TrackTech instructions.
1-Year Limited Warranty
This TrackTech product is backed by a one-year limited warranty against defects in materials and workmanship from the original purchase date. Coverage applies to the original purchaser with dated proof of purchase. Contact TrackTech for return authorization before shipping the part for inspection. If inspection confirms a covered defect, TrackTech will replace the part. Coverage excludes normal wear and damage caused by improper installation, misuse, contamination, inadequate maintenance, unauthorized modifications or repairs, or use outside the part’s listed application. Customers are responsible for shipping costs to and from TrackTech, whether the warranty claim is approved or denied. Labor, diagnostics, removal, reinstallation, towing, downtime, and other related expenses are not covered.


